COTS PRODUCTS > COTS DIGITAL / ANALOG PRODUCTS > ARINC - 429 AVIONICS PRODUCTS > AT-PMC-429 IP
 
PMC: PCI bus 32-bit, 33MHz
IPC429 – Next generation 429 core
Improved architecture to enhance performance
16 Transmit and 16 Receive Channels
Programmable High/Low Speed Operation
Upto 256 Label memory for each Receive channel
128 Word Tx and Rx FIFOs for each Transmit and Receive channel
Programmable interrupts
Asynchronous and Synchronous Messaging
Programmable Refresh rates of 20ms min to 200ms max
Full Error Injection & Detection
Rear P14 or Front I/O available
IRIG-B Time Code Input (Digital)
48-bit, microsecond time-tagging
Label Selective Trigger for Capture/Filtering
Optional discrete I/O and IRIG-B
Optional Disconnect of Arinc429 transmit channels through PhotoMos Relays
Driver & High-level API for Windows XP, Windows 7 and Linux
 

The AT-PMC-429 IP card enables electronic systems to interface with commercial and military avionics data buses. They provide extensive functionality and are used to communicate with, simulate, test, and monitor ARINC429 equipment and systems. This high-density high-performance card is suitable for applications ranging from test equipment to rugged deployable systems. The card is available in front and rear panel I/O, various ARINC channel counts and capabilities.

The card is designed to transmit and receive messages up to 32 channels. Up to 16 channels for Receive (Rx) and 16 channels Transmit (Tx) mode. Each channel is software configurable for high or low speed (12.5k or 100k bits per second) and ARINC429 protocol requirements.

To provide I/O and processing expansion capabilities, IO are available on either rear user IO connectors or Front Panel VHDCI Connectors. An onboard IRIG-B time encoder and decoder allows users to accurately synchronize single or multiple modules to a common time source.

The ARINC data word can be decoded and sorted based on the Label and SDI bits and stored in FIFOs. The card is integrated with a powerful software that reduces development time. All databus functionality is supported from our advanced API (Application Programming Interface). The AT-PMC-429 IP card is available in Conduction-cooled version.

Software

The AT-PMC-429 IP software includes Drivers and APIs. The AT-PMC-429 IP card comes with a powerful set of library functions to access the entire ARINC429 functionality. The drivers are designed in a modular fashion consisting of component functions and application functions. The user’s test program can be developed with few calls to the driver, by using the set of Application functions provided. Driver and high-level API libraries for Windows XP, Windows 7 and Linux are available.

Bus Interface
PMC - 32-bit, 33/66 MHz (PCI 2.2)
ARINC429 Interface
Supports up to 32 ARINC429 channels
  > 16 Transmit Channels
> 16 Receive Channels
128 Word deep FIFO on each channel
Programmable Interrupts
Built-in Fault Detection Circuitry
Set parity per channel (odd/even/data)
Sync output on all or selected messages
Handles periodic and transfer protocols
Message filters and schedules
Data Rates: 12.5/50 Kbps in low speed and 100Kbps in high speed
Standard input levels: ±6.5 to ±13 VDC
Filtering: Label and/ or SDI
Parity: Odd, even or none
Error reporting: Parity
Output levels:± 10 VDC
Discrete I/O
Optional Six TTL Discrete Inputs & six Discrete Outputs in PMC mode
IO Configurations
IO available on both Front Panel 68 pin VHDCI Connector and Rear Connectors (P14)
Software Support
Driver and high-level API libraries for Windows XP, Windows 7, Linux
Sample applications provided
Physical
Standard Single wide Mezzanine Card form factor confirming to IEEE 1386.1 (74 mm x 149 mm)
Conduction Cooled PMC Card without Bezel
Environmental
  Air Cooled Conduction Cooled
Operating Temperature 0°C to +60°C -40°C to +85°C
Power
Supply +5V, +3.3V, +12V and -12V from PMC Connectors
All other voltages are internally derived
Warranty
1 year limited warranty
 
CORPORATE   ABOUT   FOLLOW US ON
AdTEC Electronics Inc.
4677 Old Ironsides Drive
Ste 230 Santa Clara
California 95054, USA
 
AdTEC Electronics specializes in providing end-to-end custom product design & development encompassing System, Mechanical, Board Electronics, Chip design, Firmware and Application Software Engineering. Our design capabilities include design for testability and rugged design to meet both commercial and stringent regulations.
 
HOME ABOUT US COTS PRODUCTS SERVICES & SOLUTIONS SUPPORT & RESOURCES NEWS & EVENTS BLOG CONTACT US
AdTEC Electronics Inc.